SMONET Wireless Security Camera
System with 8 Channels and 8 Full-Color
High Resolution Cameras
For this system,
you must have a TV or PC Monitor to
display the camera's video.
You will need either a VGA or HDMI
Cable for the monitor connection to
the NVR Box (Network Video
Recorder). For remote video
monitoring and playback, you must
connect the NVR Box to a WAN Router
that is connected to the internet.
The system may be
Plug & Play and give the impression that
setup is simple and can be done in a
matter of minutes. From our
experience, it's going to take some time
to figure everything out. It takes
time to install and setup the system on
your TV, download and install the phone
app and install the optional system on
your PC.
High Level
Setup Overview
The following is
simply to give you an idea at a high
level of what is required to initially
setup the system.
Step 1:
Plug the NVR Box in, connect it
to your TV and plug in the
included mouse. We found
that we had to plug in the mouse
after the box was plugged
in or it did not recognize the
mouse.
Step 2:
Plug in at least one camera to a wall
outlet for power.
Step 3:
Confirm the video image displays
on the TV screen. Test
each camera to be sure they all work
correctly and display in the
separate boxes on the screen.
You can click each box on the
screen to switch a camera to full-screen
view.
Step 4:
Once you have the system up and
running as a standalone system,
you can connect the NVR Box to your
router with a network cable.
(See our note below on the network
cable)
Step 5:
Install the software form the
internet onto your PC and/or
download the free App to your
phone and configure it as
required.
Again, the steps
are extremely high level and the
documentation that comes with the system
will explain the setup, camera
configuration and features in greater
detail.
This system comes with a built in 2TB
HDD. If the HDD become full, new recordings
will automatically overwrite prior
recordings.
We had to use our own Network
Cable to connect the NVR Box to our
Router as the one provided would take
forever (hours) to make the connection
and then would disconnect from the
internet. The cable provided worked fine for making a hardwired
connection to a camera when we were
playing with registering one manually.
Not sure what was going on or why, but
using my own network cable solved my
internet connection problem.
These cameras come with wall mounts, so
they can be slightly awkward when just
placing them on a shelf or other locations
around the inside of your home if you do
not intent to mount them. You may
need to place something under or next to
them to keep them from rolling or to
position the camera exactly how you want
it. |